Welcome to W2IHY Technologies

1 X 4 Coax Switch

SKU: 1000403

Availability: In stock

$149.99

The 1 X 4 Coax Switch is designed to be used with the W2IHY 3 X 1 Controller. When the 1 X 4 Coax Switch is attached to the W2IHY 3 X 1 Controller the connectivity of the controller is significantly expanded. The 1 X 4 Coax Switch is built with a Rugged steel case and when used with the W2IHY 3 X 1 Controller



  • connects any one of 3 radios to any one of 3 amplifiers and/or up to 4 antennas

  • Capable of easily handling 10,000 watts PEP of RF.

  • Wall or desk mountable

  • Dimensions 6 ½ I” W x 1-5/8” H x 2 5/8” deep

1x4 Coax Switch Front

More Views

Details


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 X 4 Connections11 X 4 CONNECTIONS

Station ground should be connected to this connector.

Grounding this point grounds any of the four coax connectors that are not connected to the Input coax connector.

 

This Input Coax RF Connector may be connected to one of 4 Output Coax RF Connectors. Connection of the Input to the output is done using the control 5 Pin DIN connection.

 



This unit is capable of easily handling up to 10,000 watts PEP of RF. These 4 coax RF connectors are used to connect antennas or other external devices to the Input Coax RF Connector. Switching the input connector to one of 4 Output connectors is done using the control 5 Pin DIN connection.

This unit is capable of easily handling up to 10,000 watts PEP of RF



CONTROL CONNECTOR

This 5 Pin DIN switches the coax input of the 1 X 4 Switch to one of the 4 coax outputs. The 1 X 4 Antenna Switch Control Connector may be connected to the 3 X 1 Controller / Switch 1 X4 Select 5 pin DIN output. Below is a picture that defines the function of the pins on the 5 PIN DIN.

  

OUTPUT COAX LEDS
These LED's are wired to indicate which coax output is connected to the coax input.