Welcome to W2IHY Technologies

One 3 X 4 Switch Plus with Two 1 X 4 Switches

SKU: 1000404

Availability: In stock

$749.99

Are your ready for coax switching to switch any one of 3 radios to any one of 3 amplifiers and or up to 4 antennas? Then you’re ready for the: 


3 X 4 SWITCH PLUS with 2 -1 X 4 COAX SWITCHES by W2IHY


THE ULTIMATE MULTI-SWITCHING SYSTEM!


This system includes one W2IHY 3 x 1 controller, two W2IHY 1 X 4 Coax Switches, a power cable and the control cable that connects the controller to the two1 X 4 switch.


 


Download the Manual

One 3 X 4 Switch Plus with  Two 1 X 4 Switches

More Views

Details

Switch Any One of 3 Radios to Any One of 3 amplifiers and/or up to 4 Antennas - The Ultimate in Coax Switching Convenience!

The 3 X 4 Switch Plus with two 1 X 4  Coax Switches  system consists of three  devices:

3 X 1 Controller/Switch Unit

two 1 X 4 Antenna Switch.

The possible switching combinations and versatility of the 3 X 4 Switch Plus two  1 X 4  Coax Switches  is impressive!

The 3 X 4 Coax Switch Plus with two  1 X 4  Coax Switches  is built with a rugged steel chassis, very easy to use front panel controls, and very clearly marked rear-panel connections. We feel so confident that you will be delighted with the 3 X 4 Switch Plus two  1 X 4  Coax Switches, that we offer a 30-day money back with our “no questions asked” guarantee. This switching system represents a new reference point for easy to use amateur radio equipment.

Front panel switching connects any one of 3 radios to any one of 3 amplifiers and/or up to 4 antennas.

Capable of easily handling 10,000 watts PEP of RF.

Greater than -70dB isolation typical.

Turning a single knob automatically switches and routes radio/amplifier, coax/ ALC and Amplifier keying.

Automatic switching of radio/amplifier when connected to the iPlus.

Turning a single knob automatically switches the microphone audio as well as the radio, amplifier COAX/ALC and Amplifier keying when connected to the iPlus.

Buffered keying of linear amplifier(s).

Single front panel switch to disconnect keying to linear amplifier(s).

RCA connectors provided to attach external device for keying control of linear amplifier(s).

Supports mono and stereo audio switching to a single speaker system.

Fault-tolerant design prevents damage to radios attached to the switch.

19 inch rack mountable!

Fully assembled and ready to go.

 

 

Click here to see details on 3 X 4 Coax Switch Plus Controller  and 1 X 4 Coax switch  

 

3 X 4 SWITCH PLUS WITH TWO 1 X 4 COAX SWITCH CONFIGURATION EXAMPLE

Using one or more W2IHY 3 X 4 Controllers will greatly simplify operating amateur radio stations with multiple radios, one or more linear amplifiers, and multiple antennas.

The W2IHY 3 X 4 Coax Switch Plus with two 1 X 4 Coax Switches  may be configured in many ways. The following is an example of a typical configuration.

 Configuration 5

This configuration connects up to 3 radios to up to any of up to 3 linear  amplifies and a single meter and tuner, The amp / tuner output(s) are connected to antennas, antenna switches or other devices. This  configuration requires one Coax Switch Controller and two 1 x 4  Coax Switches.

You may also be interested in the following product(s)

3 X 1 Controller Switch Cable Package

3 X 1 Controller Switch Cable Package

$60.00